The changelog for key MemSQL Ops releases is listed here. To verify and download the latest version of Ops, see http://versions.memsql.com/memsql-ops/latest-v6.

2018-05-10 Version 6.0.11

• Support num_parallel_jobs setting in MemSQL Ops config to adjust the maximum number of jobs MemSQL Ops can execute in parallel across the cluster (default 10)
• Modify start/stop cluster ordering so that online upgrade from MemSQL 6.0.X can work
• Add more information to cluster report, such as additional pipelines information, network interface information, output of SHOW AGGREGATORS and SHOW REPLICATION STATUS SQL queries

2018-02-14 Version 6.0.10

• Fixed bug in the add aggregator code that can prevent upgrade from finishing

2018-02-05 Version 6.0.9

• Improved portability of MemSQL Ops on certain systems

2018-01-17 Version 6.0.8

• Ensure that connections from Ops to MemSQL use OpenSSL rather than YaSSL

2017-11-09 Version 6.0.7

• Change disk usage check for the memsql-upgrade command to be on the MemSQL Ops install directory, rather than on the MemSQL data mounts
• Move disk usage check to an earlier stage of memsql-upgrade
• Update pipelines API to support 64 bit ints
• Disable sync variable check on memsql-config-update for MemSQL 6.0.5 and older
• Add a tmpdir setting to Ops config

2017-10-18 Version 6.0.6

• Support for MemSQL 6
• Remove support for non-colocated nodes
• Improvements to the job-list command
• Added sysctl -a and Transparent Huge Pages information to Cluster Report
• Upgraded Paramiko version to support hmac-sha2-256
• Renamed MemSQL installation directories to include the install’s ID
• Removed Spark Streamliner, Data Import and Speed Test

2018-02-14 Version 5.8.4

• The agent-upgrade command will not check for the latest version of MemSQL Ops over the Internet if the user supplies a version or tarball path

2018-01-19 Version 5.8.3

• Ensure that connections from Ops to MemSQL use OpenSSL rather than YaSSL

2017-08-15 Version 5.8.2

• Bumped bundled MySQL client from version 5.5 to 5.7
• The memsql-upgrade command supports a flag to set a timeout for stopping the cluster
• The agent-upgrade command supports a flag to set a timeout for upgrading each agent
• Allow memsql-upgrade –memsql-id flag to accept prefixes of MemSQL IDs
• Add memsql.cnf to agent report
• Use new _BT in agent report when available
• Fix bug in agent report swapping database name and memsql id in queries
• Stop pipelines engine from running pipelines status queries if there are no pipelines running
• Change job system to reduce the volume of each agent’s API requests
• Allow user to disable analytics

2017-06-07 Version 5.8.1

• A timeout argument has been added to the MEMSQL-STOP command.

2017-04-16 Version 5.8.0

• Ops now supports custom tokens for inter-agent authentication. See the following topics for more information:
• API-TOKEN
• AGENT-UPDATE-API-TOKEN
• FOLLOW

2017-01-26 Version 5.7.1

• Fixed issues that could occur when creating a columnstore-based pipeline.
• Metrics on the Status page are now presented in International System of Units (SI) format.

2017-01-24 Version 5.7.0

• If Ops doesn’t have internet connectivity, it will not check to see if upgrades are available
• Adds support for upgrading individual MemSQL nodes using the memsql-upgrade command
• No longer runs _BT during cluster reports by default
• Adds support for all SKIP ... ERRORS modes in the Pipelines interface. See LOAD DATA for more information.
• Ops will not take a network lock when running a remote API call
• Now sets TCP Keepalive on sockets to allow the primary to handle disconnections sooner
• Adds the output of mount to cluster reports
• Ops will not attempt to fetch more pipeline errors than its limit
• Enforces selecting an error handling mode when a user creates a pipeline
• Improved error messages in jobs and intentions

2016-11-15 Version 5.5.3

• Fixes a bug where the cluster engine was incorrectly queueing start jobs when in the Unreachable state
• Ops is now more careful about starting and stopping orphaned Spark components
• The Agent Report now handles DNS resolution failures more cleanly
• Fixes a bug where Pipelines’ In Progress batches were being incorrectly cached by Ops, which means they would not disappear from the interface
• Ops now prioritizes High Availability notifications over Speed Test notifications
• The Agent Report now also includes a stack dump of all the threads running in Ops
• Fixes a bug where analytics data was being counted twice
• Fixes a bug where Ops could be started during an agent upgrade
• Fixes a bug where Pipelines metrics were disappearing when navigating around Ops pages
• The status page now features spinners while loading data and warns the user if an online MemSQL cluster cannot be found
• Fixes a bug where clicking the back button in the Deploy MemSQL modal would go two steps back instead of one
• Fixes a bug where Ops would slow down when too many jobs had been queued (including finished jobs)
• Ops now closes open MemSQL connections during memsql-ops stop
• Fixes a bug where the Schema page did not expect certain values to be NULL

2016-10-19 Version 5.5.2

• Ops will now ensure all the nodes in a cluster are fully offline before upgrading
• Adds a new MemSQL State called UNREACHABLE which indicates that Ops cannot connect to the MemSQL instance
• Adds a new arg of --limit to job-list to limit the number of jobs listed
• When attempting to upgrade an offline cluster, Ops will prevent you from upgrading unless --skip-snapshot is enabled
• Adds information_schema.processlist to cluster report
• Fixes help strings in memsql-unmonitor to make them clearer
• Fixes error strings in memsql-upgrade to make them more explanatory
• Fixes a bug where port numbers were being incorrectly suggested when adding new nodes
• Fixes a bug where SSH credentials were being stored with the wrong user
• Fixes a bug where the errors table was incorrectly using the wrong time format
• Fixes a bug where byte usage for a table was being incorrectly displayed when High Availability is enabled

2016-10-03 Version 5.5.1

• Improved debuggability of Agent upgrade
• Fixed bug preventing the deprecated cluster-upgrade command from working
• Warns the user if we detect a maximum_memory imbalance between leaf nodes in the cluster
• Fixed bug with setting up license via support modal

2016-09-26 Version 5.5.0

• Adds UI Support for new Pipelines feature
• Changes to our storage/sqlite layer to improve performance and allow Ops to scale to larger clusters
• memsql-upgrade no longer restarts on rollback by default
• Changed “Swap” bar to “Paging”
• agent-ssh uses a UNIX socket to interact with the secure credentials store
• Warns the user if we detect a maximum_memory imbalance between leaf nodes in the cluster
• Ensures that HA failover doesn’t needlessly happen during cluster stop/start/restart
• Treats the local disk being out of inodes as an out of disk error
• Schema explorer suggests running ANALYZE TABLE if it detects the table has changed more than 30% since the last time the table was analyzed.
• Warns the user if we detect multiple versions of MemSQL running in the cluster
• Added –force option to memsql-update-root-password to allow the user to inform Ops of a password change that happened outside of Ops control
• memsql-optimize now tells the user what it is going to do before doing it
• Adds a profiler to the Ops runtime to assist with debugging of production systems without a custom Ops build
• The user can now provide passwords via ENVIRONMENT variables in order to prevent them from showing up process lists
• Increases default report size to 150MB
• Enabled –hard-stop when stopping the entire MemSQL cluster
• Security: updated version of OpenSSL
• Adds a NO_SPARK variable to the Ops settings, if this is set on an Agent, Ops will not deploy any Spark processes to that agent
• Ops queries will no longer show up in the MemSQL query log
• When deleting MemSQL leaves ensure that REMOVE LEAF is always run
• Fixed Memory usage bug relating to memory values being displayed incorrectly

2016-06-14 Version 5.1.0

• New iops monitoring bar in Ops cards
• Better HA support
• Bug and stability fixes
• syslog support in Ops

2016-04-29 Version 5.0.3

• Bug: Fixed issues with checkpointing database in Streamliner

2016-03-30 Version 5.0.2

• Feature: The new Schema Explorer allows users to explore the hierarchy of databases and tables in MemSQL. This tool can be used to help capacity plan or provide insight on data distribution.
• Feature: The new Query Explorer provides access to under-performing queries along with aggregated metrics over the historical record.
• Feature: Ops now includes a visual way to import your data into MemSQL from S3, HDFS and MySQL.
• Feature: Ops now includes a feedback form to enable issues to be easily reported.
• Stability: MemSQL Ops 5.0.0 (BETA) includes numerous performance, stability and bug fixes.

Was this Article Helpful?

Thanks For Your Feedback!